help语法
mitmdump --help
mitmdump --help
usage: mitmdump [options] [filter]
positional arguments:
filter_args Filter expression, equivalent to setting both the view_filter and save_stream_filter options.
optional arguments:
-h, --help show this help message and exit
--version show version number and exit
--options Show all options and their default values
--commands Show all commands and their signatures
--set option[=value] Set an option. When the value is omitted, booleans are set to true, strings and integers are set to None (if permitted),
and sequences are emptied. Boolean values can be true, false or toggle.
-q, --quiet Quiet.
-v, --verbose Increase log verbosity.
--mode MODE, -m MODE Mode can be "regular", "transparent", "socks5", "reverse:SPEC", or "upstream:SPEC". For reverse and upstream proxy modes,
SPEC is host specification in the form of "http[s]://host[:port]".
--no-anticache
--anticache Strip out request headers that might cause the server to return 304-not-modified.
--no-showhost
--showhost Use the Host header to construct URLs for display.
--rfile PATH, -r PATH
Read flows from file.
--scripts SCRIPT, -s SCRIPT
Execute a script. May be passed multiple times.
--stickycookie FILTER
Set sticky cookie filter. Matched against requests.
--stickyauth FILTER Set sticky auth filter. Matched against requests.
--save-stream-file PATH, -w PATH
Stream flows to file as they arrive. Prefix path with + to append.
--no-anticomp
--anticomp Try to convince servers to send us un-compressed data.
--flow-detail LEVEL The display detail level for flows in mitmdump: 0 (almost quiet) to 3 (very verbose). 0: shortened request URL, response
status code, WebSocket and TCP message notifications. 1: full request URL with response status code 2: 1 + HTTP headers 3:
2 + full response content, content of WebSocket and TCP messages.
Proxy Options:
--listen-host HOST Address to bind proxy to.
--listen-port PORT, -p PORT
Proxy service port.
--no-server, -n
--server Start a proxy server. Enabled by default.
--ignore-hosts HOST Ignore host and forward all traffic without processing it. In transparent mode, it is recommended to use an IP address
(range), not the hostname. In regular mode, only SSL traffic is ignored and the hostname should be used. The supplied
value is interpreted as a regular expression and matched on the ip or the hostname. May be passed multiple times.
--allow-hosts HOST Opposite of --ignore-hosts. May be passed multiple times.
--tcp-hosts HOST Generic TCP SSL proxy mode for all hosts that match the pattern. Similar to --ignore, but SSL connections are intercepted.
The communication contents are printed to the log in verbose mode. May be passed multiple times.
--upstream-auth USER:PASS
Add HTTP Basic authentication to upstream proxy and reverse proxy requests. Format: username:password.
--proxyauth SPEC Require proxy authentication. Format: "username:pass", "any" to accept any user/pass combination, "@path" to use an Apache
htpasswd file, or "ldap[s]:url_server_ldap:dn_auth:password:dn_subtree" for LDAP authentication.
--no-rawtcp
--rawtcp Enable/disable experimental raw TCP support. TCP connections starting with non-ascii bytes are treated as if they would
match tcp_hosts. The heuristic is very rough, use with caution. Disabled by default.
--no-http2
--http2 Enable/disable HTTP/2 support. HTTP/2 support is enabled by default.
SSL:
--certs SPEC SSL certificates of the form "[domain=]path". The domain may include a wildcard, and is equal to "*" if not specified. The
file at path is a certificate in PEM format. If a private key is included in the PEM, it is used, else the default key in
the conf dir is used. The PEM file should contain the full certificate chain, with the leaf certificate as the first
entry. May be passed multiple times.
--no-ssl-insecure
--ssl-insecure, -k Do not verify upstream server SSL/TLS certificates.
--key-size KEY_SIZE TLS key size for certificates and CA.
Client Replay:
--client-replay PATH, -C PATH
Replay client requests from a saved file. May be passed multiple times.
Server Replay:
--server-replay PATH, -S PATH
Replay server responses from a saved file. May be passed multiple times.
--no-server-replay-kill-extra
--server-replay-kill-extra
Kill extra requests during replay.
--no-server-replay-nopop
--server-replay-nopop
Don't remove flows from server replay state after use. This makes it possible to replay same response multiple times.
--no-server-replay-refresh
--server-replay-refresh
Refresh server replay responses by adjusting date, expires and last-modified headers, as well as adjusting cookie
expiration.
Replacements:
--replacements PATTERN, -R PATTERN
Replacement patterns of the form "/pattern/regex/replacement", where the separator can be any character. May be passed
multiple times.
Set Headers:
--setheaders PATTERN, -H PATTERN
Header set pattern of the form "/pattern/header/value", where the separator can be any character. May be passed multiple
times.
mitmproxy --help
mitmproxy --help
usage: mitmproxy [options]
optional arguments:
-h, --help show this help message and exit
--version show version number and exit
--options Show all options and their default values
--commands Show all commands and their signatures
--set option[=value] Set an option. When the value is omitted, booleans are set to true, strings and integers are set to None (if permitted),
and sequences are emptied. Boolean values can be true, false or toggle.
-q, --quiet Quiet.
-v, --verbose Increase log verbosity.
--mode MODE, -m MODE Mode can be "regular", "transparent", "socks5", "reverse:SPEC", or "upstream:SPEC". For reverse and upstream proxy modes,
SPEC is host specification in the form of "http[s]://host[:port]".
--no-anticache
--anticache Strip out request headers that might cause the server to return 304-not-modified.
--no-showhost
--showhost Use the Host header to construct URLs for display.
--rfile PATH, -r PATH
Read flows from file.
--scripts SCRIPT, -s SCRIPT
Execute a script. May be passed multiple times.
--stickycookie FILTER
Set sticky cookie filter. Matched against requests.
--stickyauth FILTER Set sticky auth filter. Matched against requests.
--save-stream-file PATH, -w PATH
Stream flows to file as they arrive. Prefix path with + to append.
--no-anticomp
--anticomp Try to convince servers to send us un-compressed data.
--console-layout {horizontal,single,vertical}
Console layout.
--no-console-layout-headers
--console-layout-headers
Show layout component headers
Proxy Options:
--listen-host HOST Address to bind proxy to.
--listen-port PORT, -p PORT
Proxy service port.
--no-server, -n
--server Start a proxy server. Enabled by default.
--ignore-hosts HOST Ignore host and forward all traffic without processing it. In transparent mode, it is recommended to use an IP address
(range), not the hostname. In regular mode, only SSL traffic is ignored and the hostname should be used. The supplied
value is interpreted as a regular expression and matched on the ip or the hostname. May be passed multiple times.
--allow-hosts HOST Opposite of --ignore-hosts. May be passed multiple times.
--tcp-hosts HOST Generic TCP SSL proxy mode for all hosts that match the pattern. Similar to --ignore, but SSL connections are intercepted.
The communication contents are printed to the log in verbose mode. May be passed multiple times.
--upstream-auth USER:PASS
Add HTTP Basic authentication to upstream proxy and reverse proxy requests. Format: username:password.
--proxyauth SPEC Require proxy authentication. Format: "username:pass", "any" to accept any user/pass combination, "@path" to use an Apache
htpasswd file, or "ldap[s]:url_server_ldap:dn_auth:password:dn_subtree" for LDAP authentication.
--no-rawtcp
--rawtcp Enable/disable experimental raw TCP support. TCP connections starting with non-ascii bytes are treated as if they would
match tcp_hosts. The heuristic is very rough, use with caution. Disabled by default.
--no-http2
--http2 Enable/disable HTTP/2 support. HTTP/2 support is enabled by default.
SSL:
--certs SPEC SSL certificates of the form "[domain=]path". The domain may include a wildcard, and is equal to "*" if not specified. The
file at path is a certificate in PEM format. If a private key is included in the PEM, it is used, else the default key in
the conf dir is used. The PEM file should contain the full certificate chain, with the leaf certificate as the first
entry. May be passed multiple times.
--no-ssl-insecure
--ssl-insecure, -k Do not verify upstream server SSL/TLS certificates.
--key-size KEY_SIZE TLS key size for certificates and CA.
Client Replay:
--client-replay PATH, -C PATH
Replay client requests from a saved file. May be passed multiple times.
Server Replay:
--server-replay PATH, -S PATH
Replay server responses from a saved file. May be passed multiple times.
--no-server-replay-kill-extra
--server-replay-kill-extra
Kill extra requests during replay.
--no-server-replay-nopop
--server-replay-nopop
Don't remove flows from server replay state after use. This makes it possible to replay same response multiple times.
--no-server-replay-refresh
--server-replay-refresh
Refresh server replay responses by adjusting date, expires and last-modified headers, as well as adjusting cookie
expiration.
Replacements:
--replacements PATTERN, -R PATTERN
Replacement patterns of the form "/pattern/regex/replacement", where the separator can be any character. May be passed
multiple times.
Set Headers:
--setheaders PATTERN, -H PATTERN
Header set pattern of the form "/pattern/header/value", where the separator can be any character. May be passed multiple
times.
Filters:
See help in mitmproxy for filter expression syntax.
--intercept FILTER Intercept filter expression.
--view-filter FILTER Limit the view to matching flows.
mitmweb --help
mitmweb --help
usage: mitmweb [options]
optional arguments:
-h, --help show this help message and exit
--version show version number and exit
--options Show all options and their default values
--commands Show all commands and their signatures
--set option[=value] Set an option. When the value is omitted, booleans are set to true, strings and integers are set to None (if permitted),
and sequences are emptied. Boolean values can be true, false or toggle.
-q, --quiet Quiet.
-v, --verbose Increase log verbosity.
--mode MODE, -m MODE Mode can be "regular", "transparent", "socks5", "reverse:SPEC", or "upstream:SPEC". For reverse and upstream proxy modes,
SPEC is host specification in the form of "http[s]://host[:port]".
--no-anticache
--anticache Strip out request headers that might cause the server to return 304-not-modified.
--no-showhost
--showhost Use the Host header to construct URLs for display.
--rfile PATH, -r PATH
Read flows from file.
--scripts SCRIPT, -s SCRIPT
Execute a script. May be passed multiple times.
--stickycookie FILTER
Set sticky cookie filter. Matched against requests.
--stickyauth FILTER Set sticky auth filter. Matched against requests.
--save-stream-file PATH, -w PATH
Stream flows to file as they arrive. Prefix path with + to append.
--no-anticomp
--anticomp Try to convince servers to send us un-compressed data.
Mitmweb:
--no-web-open-browser
--web-open-browser Start a browser.
--web-port PORT Web UI port.
--web-iface INTERFACE
Web UI interface.
Proxy Options:
--listen-host HOST Address to bind proxy to.
--listen-port PORT, -p PORT
Proxy service port.
--no-server, -n
--server Start a proxy server. Enabled by default.
--ignore-hosts HOST Ignore host and forward all traffic without processing it. In transparent mode, it is recommended to use an IP address
(range), not the hostname. In regular mode, only SSL traffic is ignored and the hostname should be used. The supplied
value is interpreted as a regular expression and matched on the ip or the hostname. May be passed multiple times.
--allow-hosts HOST Opposite of --ignore-hosts. May be passed multiple times.
--tcp-hosts HOST Generic TCP SSL proxy mode for all hosts that match the pattern. Similar to --ignore, but SSL connections are intercepted.
The communication contents are printed to the log in verbose mode. May be passed multiple times.
--upstream-auth USER:PASS
Add HTTP Basic authentication to upstream proxy and reverse proxy requests. Format: username:password.
--proxyauth SPEC Require proxy authentication. Format: "username:pass", "any" to accept any user/pass combination, "@path" to use an Apache
htpasswd file, or "ldap[s]:url_server_ldap:dn_auth:password:dn_subtree" for LDAP authentication.
--no-rawtcp
--rawtcp Enable/disable experimental raw TCP support. TCP connections starting with non-ascii bytes are treated as if they would
match tcp_hosts. The heuristic is very rough, use with caution. Disabled by default.
--no-http2
--http2 Enable/disable HTTP/2 support. HTTP/2 support is enabled by default.
SSL:
--certs SPEC SSL certificates of the form "[domain=]path". The domain may include a wildcard, and is equal to "*" if not specified. The
file at path is a certificate in PEM format. If a private key is included in the PEM, it is used, else the default key in
the conf dir is used. The PEM file should contain the full certificate chain, with the leaf certificate as the first
entry. May be passed multiple times.
--no-ssl-insecure
--ssl-insecure, -k Do not verify upstream server SSL/TLS certificates.
--key-size KEY_SIZE TLS key size for certificates and CA.
Client Replay:
--client-replay PATH, -C PATH
Replay client requests from a saved file. May be passed multiple times.
Server Replay:
--server-replay PATH, -S PATH
Replay server responses from a saved file. May be passed multiple times.
--no-server-replay-kill-extra
--server-replay-kill-extra
Kill extra requests during replay.
--no-server-replay-nopop
--server-replay-nopop
Don't remove flows from server replay state after use. This makes it possible to replay same response multiple times.
--no-server-replay-refresh
--server-replay-refresh
Refresh server replay responses by adjusting date, expires and last-modified headers, as well as adjusting cookie
expiration.
Replacements:
--replacements PATTERN, -R PATTERN
Replacement patterns of the form "/pattern/regex/replacement", where the separator can be any character. May be passed
multiple times.
Set Headers:
--setheaders PATTERN, -H PATTERN
Header set pattern of the form "/pattern/header/value", where the separator can be any character. May be passed multiple
times.
Filters:
See help in mitmproxy for filter expression syntax.
--intercept FILTER Intercept filter expression.